Sunday, May 12, 2013

Tarp Setups

Tarp camping is a useful tool for fastpacking.  It provides light-weight shelter from the elements and is very flexible in application.  The equipment used for the following tarp designs include:

1) 5' x 8' sil-nylon tarp from Oware

2) shepherds hook titanium stakes with orange hook coatings

3) 1 mm cord that came with the tarp

Setup in the backyard is easy compared to the trail.  The ground is soft and there is plenty of flat space.  It should be noted that a good tarp shelter will need to be able to deal with obstacles such as constrained spaces, rocky ground, uneven surfaces. slanted surfaces, etc.  But in a lot of cases you should be able to use some of these things to your advantage.  I can think of no better tent stake than a tree.

The designs shown here are my first attempts at how I might set up a tarp to protect me from driving rain, and or wind that is coming from one or two directions.  This setup is intended to be combined with a water resistant or waterproof bivy to keep your sleeping bag dry.  I do not consider it important to have the foot of my bivy covered by the tarp(since my bivy is supposed to be waterproof).  I would consider it a successful application if the top half of my bivy doesn't see direct rain or wind impacts.

The first design is the good old fashion lean-to but with a foldover on one side.  This should protect you from one direction very well, and give you some more protection from one of the sides.  This would not be ideal for a swirling environment, but it does allow some space to sit up.
Lean-to foldover.

 The next setup is the Diamond.  This is not a particularly "tight" setup.  That means there will be some significant flappage in the wind.  I would use this design if there is some particularly strong winds coming from one direction.  Just point the tip of the diamond directly into the wind and it should shed the forces quite efficiently(yet to be tested).
Diamond.

 Finally, the A-Frame, but slanted.  Since this isn't a very wide tarp, I wanted to have options in terms of coverage with the A-frame.  If there is a light rain that doesn't seem to be favoring any particular direction, this would be pretty useful.  I would point the head of your bivy towards the open end if there wasn't much side action, basically for more space.  But in times of side spash of some sort being part of the equation, I think you could point the head of the bivy towards the shorter end and get more protection that way.
Slanted A-Frame


This is all good in theory, but until I actually have to deal with inclement weather on the trail it is going to be tough to evaluate the designs.  Most likely the condition I face, and the terrain or obstacles that I have to deal with will determine the design I use.

The tarp is 7 oz.  The stakes are 2, and the cord is another oz.  All together I think this is about 10 oz, which is a pretty cheap(in terms of weight-which is the fastpackers currency) insurance policy for crummy weather.

3 comments:

  1. I like your model in the first two pics, he's cute.

    ReplyDelete
  2. I was thinking of getting this one - http://www.sixmoondesigns.com/tarps/GatewoodCape.html

    for my JMT attempt this July ...

    ReplyDelete
  3. Dry Guy Waterproofing is perfect for waterproofing tarps

    http://www.dryguywaterproofing.com

    The Leader in manufacturing earth friendly waterproof products for you and your family; Waterproofing for tents, camping gear, outdoor gear, fabrics, boat covers, awnings and many other applications.

    Superior fabric waterproofing specifically formulated for backpacks, duffel bags, hiking gear, and footwear that has to withstand the abuse of hiking and camping in harsh weather conditions.

    Dry Guy lets your boots breathe while protecting against moisture, mould and stains!

    Dry Guy Protect & Extend the Life of all your Outdoor Gear

    ReplyDelete